All Things Astro
You have %itemCount% in your cart. Total being %total%
This M48 male to T2 female adapter can be used in many cases, for example to convert a M48 female thread into a T2 female one. In fact, some photographic accessories (such as some filter...
This adapter can be used in many cases, eg for connecting a corrector with M48 thread to a camera (which often presents a T2 female thread) or a digital SLR (with special T2 ring).
M48 extension rings have different uses: can be screwed to optical accessories (such as field flatteners or focal reducers) to bring the camera sensor at the right distance from the lens (to optimize performance) can...
M48 spacers can be used together with M48 extensions in order to fine set the total thickness of the extension. Specifications Thanks to the availability of different extensions and spacers, you can purchase different combinations...
T2 spacers can be used together with T2 extensions in order to fine set the total thickness of the extension. Specifications Thanks to the availability of different extensions and spacers, you can purchase different combinations...
T2 extension rings have different uses: can be screwed to optical accessories (such as field flatteners or focal reducers) to bring the camera sensor at the right distance from the lens (to optimize performance) can...
The M48-50.8mm photographic adapter can be used to connect the various cameras to telescopes. If you have a DSLR or mirrorless camera, remove the lens and connect a M48 ring to the camera, then connect...
The T2-50.8mm photographic adapter can be used to connect the various cameras to telescopes. If you have a DSLR or mirrorless camera, remove the lens and connect a T2 ring to the camera, then connect...
ALTO is the telescope cover motor we designed to let you use GIOTTO as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat...
This adapter allows you to connect ALTO-3L telescope cover motor to the front part of the OS RiDK 400 telescope.
This Cable Locking Clip (CLC) for ALTO allows you to lock to ALTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also...
This Cable Locking Clip (CLC) for GIOTTO allows you to lock to GIOTTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also...
Set 3 locking screws for GIOTTO are already included in every GIOTTO box but you can also order them as spare part. These screws are used in order to fix GIOTTO smart flat field generator...
GIOTTO is the Smart Flat Field Generator we designed to help you capture flat calibration frames, for a variety of telescope apertures. GIOTTO uses many LED lights at a color temperature similar to the Sun,...
Black color bushing long is usually included in 33 or 37mm adapters that allow to connect SESTO SENSO 2 to focusers with shafts larger than 25mm. If you upgraded from SESTO SENSO first generation to...
These colored bushings allow you to connect SESTO SENSO 2 motor shaft to focusers with different diameter shafts. All bushings are included in the SESTO SENSO 2 box but you can also order these as...
The M110 10mm/35mm extension tubes can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube is available...
There are 2 different M110 adapters available for ESATTO 4". Adapter from M110 to M68 - Allows you to connect any camera or accessory with M68 female thread Adapter from M110 to M98 - Allows...
There are 2 different M110 adapters (to Female) available for ESATTO 4". Adapter from M110 to M92x1 Female - Allows you to connect the ESATTO 4" to Takahashi photographic adapters. Adapter from M110 to M95x1...
The adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst allows you to install ESATTO 4" focuser to ProRC, RiDK, RiFAst telescopes by Officina Stellare that come with M120x1.5 female thread in the rear plate.
Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter has 35mm optical thickness and it is designed to have, when used...
Adapter ESATTO 4" for Takahashi FSQ-106 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter is designed to have, when used together with ESATTO 4", the same thickness of the...
The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH300 allows you to install ESATTO 3.5" LP focuser to Veloce RH300 telescopes by Officina Stellare. Optical thickness 9mm.
The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3.5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm. Since RH200 optimal backfocus...
If you are searching for the most precise but low profile robotic focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you...
Adapter ESATTO 3.5" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 3.5" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...
By adding this adapter, you can connect the ESATTO 3.5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.
If you want to connect a camera with a 3" nosepiece to your ESATTO 3.5" LP, just connect the 3" visual back to the M98 thread of ESATTO 3.5" LP. This adapter has an internal...
Adapter from M98 to M68 with stop ring for ESATTO 3.5" LP allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M98 thread of the ESATTO...
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a...
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm...
Adapter ESATTO 3" for Meade 16" with 4" thread allows you to connect ESATTO 3" to Meade LX200 SCT, LX200 GPS, LX200-ACF, LX600-ACF, LX800-ACF, LX850-ACF 16 inches telescopes or to all the telescopes that have...
Adapter ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED. Specifications
Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED.
Adapter ESATTO 3" for Borg 90FL and 107FL f/3.9 is composed by 2 rings, one to connect the microfocuser to the carbon fiber optical tube and another one to insert the Borg reducer/flattener in the...
Adapter ESATTO 3" for Takahashi TSA120
Thanks to its low profile, the ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back...
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you...
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO...
If you want to connect a camera with a 3" nosepiece to your ESATTO 3" or ARCO 3", just connect the 3" visual back to the M81 thread of ESATTO 3" or ARCO 3" ....
If you want to use your telescope visually with ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81...
There are 2 different M81 adapters (to Female) available for ESATTO 3" and ARCO 3". Adapter from M81 to M68 Female - Allows you to connect any camera or accessory with M68 male thread Adapter...
There are 7 different M81 adapters available for ESATTO 3" and ARCO 3". Adapter from M81 to T2 - Allows you to connect any camera or accessory with T2 (M42x0.75) female thread Adapter from M81...
ARCO 2" connected to ESATTO 2" LP thanks to the optional Adapter ESATTO 2" LP for ARCO 2" PL3600538: free aperture after ARCO 2" is 50.9mm.
There are 3 different M60 adapters available for ESATTO 2" Low Profile. Adapter from M60 to T2 - Allows you to connect any camera or accessory with T2 (M42x0.75) female thread Adapter from M60 to M48...
If you want to connect a camera with a 2" nosepiece to your ESATTO 2" LP, just connect the 2" visual back to the M60 thread of ESATTO 2" LP. This adapter has an internal...
Adapter ESATTO 2" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...
By adding this adapter, you can connect the ESATTO 2" LP low profile robotic focuser directly onto the back of SC telescopes. This adapter threads directly to the back SC thread of EdgeHD 8" and...
The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm...