iOptron
iOptron Tripod (3221) $137.99
1.25" Stainless Steel tripod that fits the Sky-Watcher Star Adventurer 2i Pro Pack, iOptron SkyGuider Pro, iPANO, SkyTracker/SkyTracker Pro, SmartEQ /Pro and SmartStar/Cube mount. Description This stainless steel tripod fits the following mounts (please specify while ordering): Sky-Watcher Star Adventurer 2i Pro Pack SkyGuider Pro tracking mount iPano AllView camera mount SkyTracker/SkyTracker Pro camera mount SmartEQ/SmartEQ Pro mount SmartStar/Cube mount with an M8 mounting hole SmartStar/Cube mount with a 3/8" mounting hole (Test the threads with the dovetail lock screw, if it fits, the thread is M8, otherwise 3/8”.) Specifications Tripod Top Die-cast aluminum Diameter Ø3.25" Spreader Plastic Leg 2...
iOptron
iOptron CEM26 Equatorial Mount with iPolar... $1,899.00
Introducing iOptron’s new compact next-generation center-balance equatorial mounts the CEM26! Description Like their predecessors, the CEM26 is designed with portability in mind, weighing in at only 10 lbs it can support up to a 26lb payload an incredible 2.6 mount weight to payload ratio. The key to enable such ratios is the CEM design focuses the mount and payload weight directly on the center of the tripod rendering “natural stability”. Building on the legacy of earlier CEM models we have added features for convenience and functionality. A positive lock gear engagement system (easy to use even when wearing gloves), Built-in...
iOptron
iOptron CEM40 Center Balance Equatorial Mo... $3,399.95
The iOptron® CEM40 mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing in at only 17.4lbs., this mount can support a payload of up to 40lbs.! That's incredible! Description Innovative iOptron Technology Make way for an innovative mount! This mount has an integrated electronic polar finder scope known as the iPolar. This tool ensures the accurate alignment of a telescope, even when the pole star is obscured. There are large levers on the quick-lock drive engagement system;...
iOptron
iOptron GEM28 German Equatorial Mount with... $1,999.99
Introducing iOptron’s new compact next-generation German equatorial mounts the GEM28! Description Like their predecessors, the GEM28 is designed with portability in mind, weighing in at only 10 lbs it can support up to a 28lb payload an incredible 2.8 mount weight to payload ratio. We achieved this using design methods developed to reduce mount mass in our CEM family of mounts. The German EQ versions were created to satisfy consumer that prefer a more traditional mount and to function at higher latitudes. Building on the legacy of earlier GEM models we have added features for convenience and functionality. A positive...
iOptron
iOptron CEM70 Center Balanced Equatorial M... $4,230.00
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce two new medium payload center balance mounts. The CEM70 and revolutionary CEM70G are new standard bearers for equatorial mounts in the 70lb payload segment. Both models are packed with advanced features however the CEM70G is the first of its type with an onboard optical guiding system increasing tracking accuracy while streamlining the components resulting in a more portable imaging setup. Description Retaining the inherent properties of the center balance design, these relatively compact medium payload mounts deliver what astronomers expect...
iOptron
iOptron GPS Module for CEM26 / GEM28 / CEM... $159.99
This 32-channel external GPS module is for CEM26/GEM28 mount. It is also a replacement module for CEM40/GEM45 mount. It consists of a GPS module and a straight wired 6P6C connection cable. 
iOptron
iOptron Lithium Ion Power Bank (8449) $77.95
Lithium-Ion (Li-ion) rechargeable battery power bank for iOptron mount. Description Overview Voltage 11V, peak at 12.6V Capacity 7800mAh Maximum discharging current: 3A No memory effect Assembled with 6X 18650 battery Built-in IC chip will prevent battery pack from over charge, over discharge and short circuit. WARNING: Li-ion battery is very sensitive to charging characteristics and may explode or burn if mishandled Charge only use a charger designed for this battery do not short circuit Do not charge the battery below 0C Do not dispose in a fire or water Disposal the battery according your government regulation Storage: Charge or discharge...
iOptron
iOptron Tri-Pier $889.99
Introducing a new concept in mount support... The iOptron Tri-Pier (8034) combines the strength and stableness of a pier with the levelling flexibility of a tripod. Aluminum pier and leg tops. Stainless steel leg extensions. The Tri-Pier feet has built-in vibration suspension pads. Description The Tri-pier fits these iOptron mounts (may need extra mounting accessories): CEM70 CEM40 GEM45(may limit low latitude application) CEM60/CEM60EC iEQ45/iEQ45 Pro iEQ30/iEQ30 Pro (may limit low latitude application) AZ Mount Pro/MiniTower/MiniTower II/MiniTower Pro (needs a center post and three levelling screws #8340-PIER) The Tri-pier also fits other brand mounts with a suitable adapter. Please note: Mount is...
iOptron
iOptron Carbon Fiber Tripod (8061) $419.95
The iOptron carbon fiber tripod provide a lightweight yet strong support for iOptron mounts. Description This tripod will fit these iOptron mounts (may need extra mounting accessories): HEM27 CEM40 GEM45(may limit low latitude application) CEM26 GEM28 SkyHunter SkyGuider Pro iEQ30/iEQ30 Pro (may limit low latitude application) Camera with 3/8 mounting hole Other equipment with 3/8 mounting hole Note: Tripod only. Mount(s) not included Specifications Max payload 50 kg (110 lbs) Self weight 2.29 kg (5 lbs) Plate diameter 120mm (~4.7") Adjustable height 535mm - 935mm (21" - 36.8") Tube size Ø40mm (upper) / Ø36mm (lower)(Ø1.6" / Ø1.4") Warranty One year...
iOptron
iOptron 5kg (11lb.) Counterweight For iEQ4... $99.99
5kg counterweight for iOptron mount. This CW is designed for following iOptron Mount: CEM70/CEM70EC/CEM70G CEM60/CEM60EC GEM45/GEM45EC/GEM45G CEM40/CEM40EC/CEM40G* (for late version with 28mm CW shaft) iEQ45 Pro iEQ45 Check your CEM40 mount CW shaft diameter before ordering. It can be used for other mount with a 28mm diameter counterweight shaft. Specifications Weight 5 kg (11 lbs.) Outer diameter 148 mm (5.8") Inner diameter 28.5 mm (1.12") Height 38 mm (1.5") Locking mechanism Locking screw with pin Locking screw thread size M8   Actual dimension, except inner diameter, may be different. Design may change without notice.
iOptron
iOptron SKyHunter AZ-EQ with Tripod and Ex... $709.95
iOptron's new ultra compact EQ/AZ GoTo mount -- introducing The SkyHunterTM!Fifteen years after releasing the innovational CubeTM AZ/EQ GoTo mount, the SkyHunterTM takes the next step toward perfection. It is the lightest and most compact full function portable goto mount in iOptron's exceptional history. Weighing in at only 2.9 lbs (including internal rechargeable battery), the SkyHunter TM is capable of supporting an 11 lbs payload in both equatorial and alt-azimuth modes.The SkyHunterTM mount features four tracking rates, 1X or sidereal, 1/2X for sky and landscape combined, solar and lunar. All 4 tracking rates work in both northern and southern hemispheres.The SkyHunterTM mount can be controlled by...
Special Order
iOptron
iOptron DC Plug Converter (4017) $13.95
DC power 5.5mm/2.1mm female to 5.5mm/2.5mm male adapter. Can be used for CEM60 Cable management Input Panel or CEM120 main power.
iOptron
iOptron CEM70 Tripod (8023ACC) $400.00
The iOptron iEQ45/CEM60/CEM70 LiteRoc tripod has a die-cast aluminum top with heavy duty stainless steel tripod legs. The new LiteRoc tripod features a 1.75” upper leg section with a 1.5” diameter lower section (same as the old 2” tripod), resulting in a lighter tripod with stability similar to the old 2”. It also has improved leg cuffs and sockets for further rigidity and redesigned leg lock levers securing the extensions position. The tripod comes with a center alignment post. Specifications Tripod Top Die-cast aluminum Diameter Ø6" (Ø150 mm) Spreader/Tray Metal accessary tray Center Bolt Length: 10", Thread: M12 Leg 2...
iOptron
iOptron Plug Converter (P-8417) $14.00
DC power 5.5mm/2.1mm female to 5.5mm/2.5mm male adapter. Can be used for CEM60 Cable management Input Panel or CEM120 main power.
iOptron
iOptron HEM27 w/ High Precision Encoder (H... $4,219.95
Introducing the HEM27 and the HEM27EC, iOptron’s revolutionary hybrid strain wave drive mounts. These light weight, high payload tiny titans will deliver an astronomy experience like never before. Description Imagine a mount head weighing in at 8.15lbs with a payload capability 29.74lbs, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi decade experience creating precision mounts, the HEM27 brings this vision to reality. Utilizing state of the art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM27s deliver unparalleled weight to payload efficiency. Its black anodized all metal CNC machined...
iOptron
iOptron HEM27 w/ iPolar (H272A) $2,547.95
Introducing the HEM27 and the HEM27EC, iOptron’s revolutionary hybrid strain wave drive mounts. These light weight, high payload tiny titans will deliver an astronomy experience like never before. Description Imagine a mount head weighing in at 8.15lbs with a payload capability 29.74lbs, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi decade experience creating precision mounts, the HEM27 brings this vision to reality. Utilizing state of the art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM27s deliver unparalleled weight to payload efficiency. Its black anodized all metal CNC machined...
iOptron
iOptron CW Extension Bar for C40/G45/C60/C... $101.40
This is an original replacement counterweight shaft (w/o CW safety screw) and the extension bar for the iEQ45 Pro/iEQ45/GEM45. Description This is also the extension bar for the CEM40/60/70 GEM45 mounts. Attach to the CW shaft and will create more counterbalance torque. Specifications: Diameter: 28mm Net Length: 10 inches Length (including threads): 11 inches (280mm)
iOptron
iOptron CEM26 w/ iPolar/1.5T (C261A1) $1,799.99
Introducing iOptron’s new compact next-generation center-balance equatorial mounts the CEM26! Like their predecessors, the CEM26 is designed with portability in mind, weighing in at only 10 lbs it can support up to a 26lb payload an incredible 2.6 mount weight to payload ratio. The key to enable such ratios is the CEM design focuses the mount and payload weight directly on the center of the tripod rendering “natural stability”. Description Building on the legacy of earlier CEM models we have added features for convenience and functionality. A positive lock gear engagement system (easy to use even when wearing gloves), Built-in...
Special Order
iOptron
iOptron 9.5kg (21lb.) Counterweight For iE... $169.95
9.5kg counterweight for iOptron mount. This CW is designed for following iOptron Mount: CEM70/CEM70EC/CEM70G CEM60/CEM60EC GEM45/GEM45EC/GEM45G CEM40/CEM40EC/CEM40G* (for late version with 28mm CW shaft) iEQ45 Pro iEQ45 Check your CEM40 mount CW shaft diameter before ordering. It can be used for other mount with a 28mm diameter counterweight shaft. Specifications Weight 9.5 kg (21 lbs.) Outer diameter 148 mm (5.8") Inner diameter 28.5 mm (1.12") Height 75 mm (2.95") Locking mechanism Locking screw with pin Locking screw thread size M8   Actual dimension, except inner diameter, may be different. Design may change without notice.
Special Order
iOptron
iOptron 1.35kg (3lb.) Counterweight For Sk... $45.00
This new 1.35 kg (3 lb) counterweight is designed for SkyTracker Pro and SkyGuider pro counterweight package (#3324), as well as other iOptron mounts.  Description Compatible iOptron Mounts SkyGuider Pro SkyGuider CubePro Cube-A (Dual AltAz/EQ mounts)* Cube-G* Cube-E* CEM25/ZEQ25 iEQ30 Pro/iEQ30 CEM40/CEM40EC** (early version with 20mm diameter CW shaft) MiniTower/ II / Pro AZ Mount Pro * It works together with CW shaft (#8607) for Cube-A/G/E.** Check your CEM40/CEM40EC mount CW shaft diameter before ordering. Please Note: This counterweight replaces the iOptron 8606. The 8606 weighed 3.5 pounds, while the newer 8605 weighs 3 pounds. Other than the weight difference,...
iOptron
iOptron 2.5kg (5.5lb.) Counterweight For i... $69.99
2.55kg counterweight for iOptron mount. This CW is designed for following iOptron Mount: CEM70/CEM70EC/CEM70G CEM60/CEM60EC GEM45/GEM45EC/GEM45G CEM40/CEM40EC/CEM40G* (for late version with 28mm CW shaft) iEQ45 Pro iEQ45 Check your CEM40 mount CW shaft diameter before ordering. It can be used for other mount with a 28mm diameter counterweight shaft. Specifications Weight 2.5 kg (5.5 lbs.) Outer diameter 118 mm (4.6") Inner diameter 28.5 mm (1.12") Height 25 mm (1") Locking mechanism Locking screw with pin Locking screw thread size M8 Actual dimension, except inner diameter, may be different.
iOptron
iOptron iGuider Autoguider System (3360) $279.99
iOptron iGuiderTM compact autoguider system consists of portable mini guiding scope with a diameter of 30mm and focal length 120mm (Part # 3361) and a iGuider 1 Camera (Part # 3362). Description The resolution of the autoguider is 6.44 arc sec/pixel, especially suitable for guiding with short to medium focal length telescopes. With dielectric AR-coated achromatic lenses, iGuider Scope is sharp in imaging and ensures high quality guiding. iGuider autoguider can mate with iOptron CEM26/GEM28/CEM40/GEM45* mounts seamlessly without any adapter. It also comes with a standard 19mm wide finder scope dovetail, readily fits with telescopes that have finder scope slot....
Special Order
iOptron
iOptron Z-axis Balancing Kit (8439) $115.70
Special designed counterweight kit for Z-axis balance. Description It fits on following iOptron mounts (has a M8 threaded holes on dovetail saddle): CEM120 CEM70 CEM40 (6" V/D dual saddle with a M8 threaded hole) GEM45 (6" V/D dual saddle with a M8 threaded hole) It can also be used for other mounts with a M8 threaded hole, on dovetail saddle or counterweight. Specifications Counterweight OD: 49mm ID: 12mm Thickness: 20mm Weight: 292g Material: Stainless Steel CW shaft Diameter: 12mm Length: 60mm Thread: M8X1.25mm (both ends) Weight: 48g CW shaft end screw: No Material: Stainless Steel
Special Order
iOptron
iOptron USB Cable (8416) $26.00
A standard USB2.0 cable for firmware upgrade and computer control of a mount
Special Order
iOptron
iOptron Tripod Metal Spreader Tray (8431) $49.40
This metal spreader is designed for iOptron 1.5", 2" and LiteRocTM tripod. Specifications Overview Tray Material: Die-case aluminum Size: 12" in diameter Weight: 2.5 lbs Shipping Dimensions: 16"X13"X3" Warranty; One (1) year limited
iOptron
iOptron Tri-Pier w/ Rolling Case (8034-RC) $1,089.40
Introducing a new concept in mount support... The iOptron Tri-Pier (8034) combines the strength and stableness of a pier with the levelling flexibility of a tripod. Aluminum pier and leg tops. Stainless steel leg extensions. The Tri-Pier feet has built-in vibration suspension pads. Description The Tri-pier fits these iOptron mounts (may need extra mounting accessories): CEM70 CEM40 GEM45(may limit low latitude application) CEM60/CEM60EC iEQ45/iEQ45 Pro iEQ30/iEQ30 Pro (may limit low latitude application) AZ Mount Pro/MiniTower/MiniTower II/MiniTower Pro (needs a center post and three levelling screws #8340-PIER) The Tri-pier also fits other brand mounts with a suitable adapter. Please note: Mount is...
iOptron
iOptron Tri-Pier 360 (TP360) (8037A) $1,362.40
The iOptron heavy duty Tri-Pier 360A combines the strength and stableness of a pier with the levelling flexibility of a tripod. 5mm thick aluminum alloy pier and CNC machined legs with adjustable feet. Description The Tri-Pier 360A can be used for the following mounts directly: CEM120 CEM70 CEM60 iEQ45 Pro/iEQ45 Paramount MyT It can also be used for the following mounts with extra parts or an adapter: AZ Mount Pro/MiniTower/MiniTower Pro (need Star Knobs with Center Post 8340-PIER) CEM40/GEM45 (need MiniPier 8032 or MiniPier top plate 8032PT) Takahashi (EM-200), SkyWatcher (HEQ5/EQ6/NEQ6/AZEQ6), Celestron (CGEM/CGEM-DX), Orion Atlas (EQ-G/AZEQ-G) ( need Tri-Pier adapter...
Special Order
iOptron
iOptron TP360 / Perm Pier Adapter for CGX ... $205.40
With this adapter, you can install your mount onto iOptron Tri-Pier 360 (#8037) and Permanent Pier (#8038). Description Currently, the following mount is supported: Replacement Pier Top for Celestron CGX/CGX-L
Special Order
iOptron
iOptron Star Knobs (3 pcs) w/ Center Post ... $49.40
A set of 3 Star Knobs for the MiniTower/MiniTower II/MiniTower Pro/AZ Mount Pro level adjustment. A center post for use on Tri-Pier/Pier/MiniPier, as well as your own tripod/pier.
Special Order
iOptron
iOptron Star Knobs (3 pcs) (8340) $36.40
A set of 3 Star Knobs for the MiniTower/MiniTower II/MiniTower Pro/AZ Mount Pro level adjustment
Special Order
iOptron
iOptron Solar Filter 70mm aper. for 70-90m... $63.70
White light solar filter with SolarLite solar film from Thousand Oaks Optical which has the optical quality of the glass with the advantages of impregnated polymer. Description Unlike the pale white image from Mylar film, it provides a nature yellow-orange solar image. The filter will never develop pin holes or scratches that can let in light and ruin a filter. Will not tear or puncture. It also has a flat surface compared to other thin film filters that have wrinkles and creases. The machined aluminum fixture makes the filter very sturdy yet light weight. This filter fits most 70mm to...
Special Order
iOptron
iOptron Soft Backpack Bag Orange (8423R) $52.00
Rugged soft case designed to hold a complete iOptron SmartStar system, including tripod, mount, hand controller and accessories. Description It also holds iOptron's R80, N114, or MC90 OTA. Quick Overview Padded shoulder straps for easy carrying Made of heavy, water-resistant polyester/nylon with full-length zipper and handle strap Dimensions: 27"L x 6"W x 10"H Color: Orange
Special Order
iOptron
iOptron Soft Backpack Bag (8423) $52.00
Rugged soft case designed to hold a complete iOptron SmartStar system, including tripod, mount, hand controller and accessories. Description It also holds iOptron's R80, N114, or MC90 OTA. Quick Overview Padded shoulder straps for easy carrying Made of heavy, water-resistant polyester/nylon with full-length zipper and handle strap Dimensions: 27"L x 6"W x 10"H Color: Black
Special Order
iOptron
iOptron Smartphone Eyepiece Adaptor Red (8... $75.40
New from iOptron -- the smartphone eyepiece adapter makes it easy and fun to use your smartphone to view and save photos (or video) of the nighttime sky. Description Simply adjust the bracket to fit any make or model smartphone device -- then fit the included eyepiece into your telescope. Perfect for public events or at home with family and friends. And placing a solar filter on your telescope lets you see sun spots right on your phone too! The iOptron smartphone eyepiece adapter makes it easy for everyone to view the sun, moon, or nighttime sky.   Quick Overview...
Special Order
iOptron
iOptron SmartEQ-Pro+ w/ Case (3200-HC) $803.40
Born out of the popular iOptron CubeTM and iEQTM mounts, the SmartEQTM Pro mount is the ultimate Grab N’ Go German equatorial GOTO mount fitting into almost everyone’s budget. Description It is ideal for visual observation and wide field astrophotography. The compact design and light weight make travelling with the mount easy. The newly updated SmartEQTM Pro+ is a fully computerized mount with a database of 150,000 objects. It offers the next generation GOTO technology from iOptron. The Go2Nova® Hand Controller is intuitive with a large LCD screen, with which you can easily set up your telescope and select where...
Special Order
iOptron
iOptron SmartEQ-Pro+ (3200) $725.40
Born out of the popular iOptron CubeTM and iEQTM mounts, the SmartEQTM Pro mount is the ultimate Grab N’ Go German equatorial GOTO mount fitting into almost everyone’s budget. Description It is ideal for visual observation and wide field astrophotography. The compact design and light weight make travelling with the mount easy. The newly updated SmartEQTM Pro+ is a fully computerized mount with a database of 150,000 objects. It offers the next generation GOTO technology from iOptron. The Go2Nova® Hand Controller is intuitive with a large LCD screen, with which you can easily set up your telescope and select where...
Special Order
iOptron
iOptron SkyTracker-Pro CW Pkg (3324) $110.50
This counterweight package is designed for iOptron SkyTracker Pro camera mount to balance a heavy payload/long camera lens. It also fits to SkyTracker mount. Description This package includes: Dovetail Plate Counterweight bar and safety cap 1.35kg counterweight Locking handle
Special Order
iOptron
iOptron SkyTracker-Pro [STP] w/ iPolar (33... $634.40
Having difficulty to polar align, especially in Southern Hemisphere? We have a solution: SkyrackerTM Pro with built-in iPolar! Upgraded from SkyTrackerTM, the Pro is more compact, small enough to fit on your palm, better precision, silent tracking, it even has a built-in rechargeable power source that runs for up to 24 hours of continuous operation. With built-in iPolar, quick and accurate polar alignment is just a joy. Description The SkyTrackerTM Pro features four tracking rates, 1X or sidereal, 1/2X for sky and landscape, solar and lunar. All 4 tracking rates work in both northern and southern hemispheres. We have also added...
Special Order
iOptron
iOptron SkyTracker-Pro [STP] (3322) $439.40
Introducing The SkyTrackerTM Pro -- iOptron’s next generation camera tracking device! Upgraded from SkyTrackerTM, the Pro is more compact, small enough to fit on your palm, better precision, silent tracking, it even has a built-in rechargeable power source that runs for up to 24 hours of continuous operation. Description The improved precision polar scope maintains a fine engraved reticule, now features adjustable illumination with eight brightness levels. Using with our smart phone app, quick and accurate polar alignment is just a joy. The SkyTrackerTM Pro features four tracking rates, 1X or sidereal, 1/2X for sky and landscape, solar and lunar....
Special Order
iOptron
iOptron SkyTracker-Pro / SkyGuider-Pro Bat... $26.00
Replacement Lithium-Poly (Lipo) rechargeable battery for iOptron SkyTracker Pro and SkyGuider Promount. Description Use the iOptron Lithium-Poly Battery as a replacement or a spare for your SkyTracker Pro camera tracking mount. Quick Overview Assembled with high quality 3.7V Li-Poly rechargeable battery pack Capacity 2000mAh Voltage 3.7V, peak at 4.2V No memory effect Built-in IC chip will prevent battery pack from over charge, over discharge and prolongs battery life Specifications Battery type: Lithium-Poly rechargeable battery Capacity: 2000 mAh Output voltage: 3.7V (peak at 4.2V) Dimensions: 0.33"X1.34"X2.00" (8.5 X 34 X 51 mm) Weight: 1.1 oz (32g) Charging voltage: <4.2V Warranty: 30 days...
iOptron
iOptron SkyGuider-Pro [SGP] w/ iPolar (3550A) $829.40
Having difficulty to polar align, especially in Southern Hemisphere? We have a solution: SkyGuider Pro with built-in iPolar! The SkyGuiderTM Pro -- iOptron’s next generation camera tracking device! Leading the camera tracker market for nearly four years, iOptron's SkyGuider Pro pushes closer to perfection. Derscription The redesigned SkyGuiderTM Pro mount head is more compact, small enough to fit on your palm, better precision, silent tracking, built-in rechargeable power source, ST-4 guiding port and camera trigger port. The DEC mounting bracket allows you to balance a heavy camera and/or lens better, or even mount a light telescope. The optional 8408 hand...
iOptron
iOptron SkyGuider-Pro [SGP] (3550) $634.40
Introducing The SkyGuiderTM Pro -- iOptron’s next generation camera tracking device! Leading the camera tracker market for nearly four years, iOptron's SkyGuider Pro pushes closer to perfection. Derscription The redesigned SkyGuiderTM Pro mount head is more compact, small enough to fit on your palm, better precision, silent tracking, built-in rechargeable power source, ST-4 guiding port and camera trigger port. The improved precision polar scope maintains a fine engraved reticule, now features adjustable illumination with different brightness levels. Using with our iOS app, quick and accurate polar alignment is just a joy. The DEC mounting bracket allows you to balance a...
Special Order
iOptron
iOptron SkyGuider Pro CW Shaft (P-SGP-CWS) $36.40
SkyGuider Pro replacement counterweight shaft. Also can be served as an extension bar. Specifications Overview Diameter: 20 mm (0.79 in) Length: 200 mm (7.875 in) Thread: 3/8"-16 (both ends) Weight: 1 lb
Special Order
iOptron
iOptron RS232-RJ9 Cable (8412) $32.50
iOptron RS232 to RJ9 serial cable is used for firmware upgrade (hand controller and/or control boards), mount computer control, or Wi-Fi adapter connection for some mounts. Description This cable may be needed for the following iOptron mounts: CEM60/CEM60EC AZ Mount Pro iEQ45 Pro and iEQ30 Pro CEM25/CEM25EC ZEQ25 SmartEQ/SmartEQ Pro/SmartEQ Pro+ CubePro with 8408 HC Cube-II SkyGuider Pro (hand controller firmware upgrade only) Note: The cable may not be compatible for other brand mounts.
Special Order
iOptron
iOptron RS232 / USB Converter (8435) $36.40
USB to RS232 converter using FTDI chipset. Tested for iOptron mount. Specifications Overview Convert a USB port to a RS232 serial port USB 2.0/1,0, work with USB 3.0 port Works for Windows XP/Vista/Win7/Win8/Win8.1/Win10 Works for Mac OS
Special Order
iOptron
iOptron Polarscope for SmartEQ (3130) $101.40
Bright field illuminated polar scope designed for the SmartEQ portable equatorial mount. Description A replacement polar scope for SmartEQ Pro and SmartEQ Pro+.
Special Order
iOptron
iOptron Polarscope for iEQ30/45 (3330-iEQ) $123.50
iOptron AccuAlignTM dark filed illuminated polar scope. Description The polar scope works with the following mounts: iEQ30 ieq45 iEQ30 Pro iEQ45 Pro Note: Threaded in polar scope for iEQ/iEQ Pro, with level bubble. Need #3333 LED and cable
Special Order
iOptron
iOptron Polarscope for CEM/GEM/SGP/STP ser... $110.50
iOptron AccuAlignTM dark filed illuminated polar scope. Description The polar scope works with the following mounts: SkyTracker SkyTracker Pro It will also work with the following mounts, but will need #3333 LED and cable ZEQ25 CEM25/CEM25EC CEM60/CEM60EC SkyGuider iEQ45 Pro (late version with slide-in polar scope)
Special Order
iOptron
iOptron Pier Top Plate FOR CEM60/CEM70 (80... $97.50
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier. Description The Pier Top can be used to mount the: CEM60 or CEM70 (w/ center post)   Specifications Overview Plate diameter: 6" (150mm) Three (3) M10 threaded through holes for MT/MT2/MTP and AZ Mount Pro Four (4) M8 threaded through holes for CEM60/CEM60-EC, or iEQ45/iEQ45 Pro Four (4) M6 threaded through holes for CEM40/GEM45/iEQ30/iEQ30 Pro
Special Order
iOptron
iOptron Pier Top Plate for CEM40/GEM45 (80... $97.50
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier. Description The Pier Top can be used to mount the: CEM40 or GEM45 (w/ center post) Note: Due to the small mount base of the mount, the low latitude operation may be affected Specifications Overview Plate diameter: 6" (150mm) Three (3) M10 threaded through holes for MT/MT2/MTP and AZ Mount Pro Four (4) M8 threaded through holes for CEM60/CEM60-EC, or iEQ45/iEQ45 Pro Four (4) M6 threaded through holes for CEM40/GEM45/iEQ30/iEQ30 Pro

Local and Loving it!

Family owned and operated since 2006

Fully Insured Shipments

All of our shipments are insured and properly packed.

Can't find it?

We have great knowledable staff ready to help you find it, if not we will bring it in!

The Art of the Downsell

We promise to not sell you something you don't need.