PrimaLuceLab

There are Three Adapter Plates Available from PrimaLuceLab AZ-EQ5 PLUS Adapter Plate (PLLFLAZEQ5) EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS Adapter Plate (PLLFLEQ6) HEQ5, Sirius EQ-G PLUS Adapter Plate (PLLFLHEQ5) These adapter plates are...

These dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise...

By adding PLUS support rings to your telescope, you can broad the possibilities of use as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel. The PLUS...

The PLUS curved blocks can be easily installed on Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescopes. Simply remove the screws already on the telescope and fix the...

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we...

The Losmandy style dovetail plate PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the...

The Vixen style dovetail plate PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plates come...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V...

The counterweight of 1 kg PLUS is ideal for those users that need to balance the optics. It can be mounted thru a clamp (optional) to the support bar Vixen or Losmandy of the optical...

Both the 220mm long and the 690mm long cables are included in the ARCO package but you can also order it as spare part if needed. This cable connects rotator port of ARCO to ESATTO...

These adapters for ARCO 3" allows you to connect rotator to focusers or correctors that come with either a 63x1, 65x1, or 86x1 female thread and to control it through SESTO SENSO 2 installed on...

You can connect ARCO 3" to the ESATTO focusers with the proper optional adapters and control it with the ARCO cable that comes in the box. Use the PL3600458 adapter to connect ARCO 3" to...

You can connect ARCO 2" to all the ESATTO focusers with the proper optional adapters and control it with the ARCO cable that comes in the ARCO box. Use the PL3600412 adapter to connect ARCO...

3" nosepiece for ARCO 3" allows you to connect rotator to focusers that come with 3" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

M56x1 male adapter for ARCO 2" allows you to connect rotator to focusers that come with M56x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. PL3600427 adapter adds 1mm...

M48x0.75 female adapter for ARCO 2" allows you to connect rotator to focusers or correctors that come with M48x0.75 male thread and to control it through SESTO SENSO 2 installed on the focuser. PL3600424 adapter...

ARCO 2" rotator connected to a focuser by adding the optional PL3600413 2" nosepiece for ARCO 2" and controlled from SESTO SENSO 2 robotic focusing motor.

Connect ARCO 3" to ESATTO or SESTO SENSO 2 by using the special port and you won't need other USB or 12V power cables. With ARCO, you can remotely control rotation angle of your camera...

Connect ARCO 2" to ESATTO or SESTO SENSO 2 by using the special port and you won't need other USB or 12V power cables. With ARCO, you can remotely control rotation angle of your camera...

The guide rings PLUS 80mm are part of our system PLUS (Prima Luce Universal System) which includes many guide rings, support rings, plates and dovetail clamps to offer you the maximum freedom to build your...

The guide rings PLUS 80mm are part of our system PLUS (Prima Luce Universal System) which includes many guide rings, support rings, plates and dovetail clamps to offer you the maximum freedom to build your...

Our 60mm CompactGuide scope is simultaneously both a finder that a guide scope! It offers, at a great price, with an achromatic lens 60mm diameter and 240mm focal length (f/4), PLUS 80mm support rings (each...

This M48 male to T2 female adapter can be used in many cases, for example to convert a M48 female thread into a T2 female one. In fact, some photographic accessories (such as some filter...

This adapter can be used in many cases, eg for connecting a corrector with M48 thread to a camera (which often presents a T2 female thread) or a digital SLR (with special T2 ring).

M48 extension rings have different uses: can be screwed to optical accessories (such as field flatteners or focal reducers) to bring the camera sensor at the right distance from the lens (to optimize performance) can...

M48 spacers can be used together with M48 extensions in order to fine set the total thickness of the extension. Specifications Thanks to the availability of different extensions and spacers, you can purchase different combinations...

T2 spacers can be used together with T2 extensions in order to fine set the total thickness of the extension. Specifications Thanks to the availability of different extensions and spacers, you can purchase different combinations...

T2 extension rings have different uses: can be screwed to optical accessories (such as field flatteners or focal reducers) to bring the camera sensor at the right distance from the lens (to optimize performance) can...

The M48-50.8mm photographic adapter can be used to connect the various cameras to telescopes. If you have a DSLR or mirrorless camera, remove the lens and connect a M48 ring to the camera, then connect...

The T2-50.8mm photographic adapter can be used to connect the various cameras to telescopes. If you have a DSLR or mirrorless camera, remove the lens and connect a T2 ring to the camera, then connect...

ALTO is the telescope cover motor we designed to let you use GIOTTO as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat...

This adapter allows you to connect ALTO-3L telescope cover motor to the front part of the OS RiDK 400 telescope.

This Cable Locking Clip (CLC) for ALTO allows you to lock to ALTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also...

This Cable Locking Clip (CLC) for GIOTTO allows you to lock to GIOTTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also...

Set 3 locking screws for GIOTTO are already included in every GIOTTO box but you can also order them as spare part. These screws are used in order to fix GIOTTO smart flat field generator...

GIOTTO is the Smart Flat Field Generator we designed to help you capture flat calibration frames, for a variety of telescope apertures. GIOTTO uses many LED lights at a color temperature similar to the Sun,...

Black color bushing long is usually included in 33 or 37mm adapters that allow to connect SESTO SENSO 2 to focusers with shafts larger than 25mm. If you upgraded from SESTO SENSO first generation to...

These colored bushings allow you to connect SESTO SENSO 2 motor shaft to focusers with different diameter shafts. All bushings are included in the SESTO SENSO 2 box but you can also order these as...

The M110 10mm/35mm extension tubes can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube is available...

There are 2 different M110 adapters available for ESATTO 4". Adapter from M110 to M68 - Allows you to connect any camera or accessory with M68 female thread Adapter from M110 to M98 - Allows...

There are 2 different M110 adapters (to Female) available for ESATTO 4". Adapter from M110 to M92x1 Female - Allows you to connect the ESATTO 4" to Takahashi photographic adapters. Adapter from M110 to M95x1...

The adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst allows you to install ESATTO 4" focuser to ProRC, RiDK, RiFAst telescopes by Officina Stellare that come with M120x1.5 female thread in the rear plate.

Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter has 35mm optical thickness and it is designed to have, when used...

Adapter ESATTO 4" for Takahashi FSQ-106 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter is designed to have, when used together with ESATTO 4", the same thickness of the...

The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH300 allows you to install ESATTO 3.5" LP focuser to Veloce RH300 telescopes by Officina Stellare. Optical thickness 9mm.

The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3.5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm. Since RH200 optimal backfocus...

If you are searching for the most precise but low profile robotic focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you...

Adapter ESATTO 3.5" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 3.5" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...

By adding this adapter, you can connect the ESATTO 3.5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.