All Things Astro
You have %itemCount% in your cart. Total being %total%
This 6" long dual dovetail saddle can convert a Vixen saddle into a Vixen/Losmandy dual saddle.
A Vixen style universal dovetail plate which fits all iOptron mounts, as well as, other popular mounts.
A Vixen style dovetail plate adapter designed for the iOptron iEQ45 dual saddle. It can fit all iOptron mounts, as well as, other popular mounts.
Losmandy Saddle for MiniTower II and MiniTower Pro Specifications Inside minimum width: 2 7/8 inch Inside minimum length: 6 inch
This secondary dovetail saddle kit fits on all iOptron Cube mounts, including CubePro, Cube-E, Cube-G and Cube-A mounts. It accepts a Vixen style dovetail bar. The mounting block has a 1/4" mounting screw. A camera...
One of this center post is needed to attach a CEM60 or iEQ45/iEQ45 Pro mount onto a Tri-Pier 360 (#8037) or Permanent Pier (8038), depends on the pier center disk configuration. Note: The black plat is...
CEM40 counterweight shaft mounting house for low latitude (~10 degree and lower). Note: To replace the standard CEM40 counterweight shaft mounting house.
CEM26 counterweight shaft mounting house for low latitude (<10 degree). Small counterweights are also needed for near equator (<5 degree). Note: To replace the standard CEM26 counterweight shaft mounting house.
This secondary dovetail saddle is for AZ Mount Pro/MiniTower Pro/MiniTower II. It accepts a Vixen style dovetail bar. Inside maximum dimensions: 46mm (1.8") wide X 48mm (1.9") long. Mounting hole diameter: 19.5mm
Heavy duty binocular adapter for iOptron AZ mount Pro. The diameter of balance shaft is 20mm. Note: Counterweights, mount and bino not included.
Thickness: 5mm Suitable for APS-C cameras (ASI2600) You can connect it to M68 OAG and 2”EFW, and mount them on the M42-thread telescope side. The best solution of 55mm back focus length Specifications Mechanical drawing...
ZWO Holder Ring for ZWO ASI PRO COOLED CAMERAS with approx 86mm diameter. To easily mount the camera onto the tripod, simply loosen the M6 screw on the side of the holder ring. Done! Currently...
1/4" to 3/8" Convert Screw Adapter. Converts an 1/4" screw thread into a 3/8" screw thread.
TeleVue Quick Release Dovetail Base. This machined metal, pre-drilled dovetail base attaches directly to the TeleVue Universal Finder Mount so it can be converted to a quick-release mount. For solar observers who want a quick...
The Meade X-Wedge is designed for long exposure astrophotography and imaging with Meade LX90, LX200, and LX600 models up to 14" diameter. This extremely heavy duty wedge allows for secure and stable mounting with exceptional...
The Meade 8" Equatorial Wedge allows for polar alignment of Meade 8" model ACF and SC models, as required for long exposure astrophotography and imaging. For use with Meade Field Tripods as supplied with compatible...
Fits V Series dovetail bars. Single axis, 360 deg. camera rotation. Dovetail mounted, no tools needed. Specifications DPA Length: 1.75" Width: 2.5" Thickness: 1.75" Weight: 14 oz. Camera bracket Height: 1.0" Weight: 2 oz.
Our ring sets provide rigid mounting for astro-imaging with our 4" and 5" scopes. Bottom and top of each ring is drilled for ¼"-20 hardware, have bat-handle locks, and two TeleVue accessory slots for ring-mounted...
For P150750 Reflector (white colour) This quality cast aluminum rings are custom made for use with all Sky-Watcher equatorial mounts and the AZ3 mount. The hinges open to allow easy installation of the optical tube...
The Celestron 14" Dovetail Bar is 14" in length and pairs perfectly with the Celestron C14 Optical Tube but also works with the Celestron CGEM and Celestron CGE Pro Mounts. This 14" Dovetail Bar by...
Fit Orion CF-80 ED ; Lunt Engineering 80 , Orion 80mm guidescope. Our cast-aluminum telescope tube rings feature quick-release, hinged clamp knobs and a felt lining for safe and secure attachment your telescope to an...
Converts V Series mounts to a D Series saddle. Converts the Popular Vixen style dovetail saddle to the Losmandy Style saddle. Simply attach the saddle adapter to your mount just using the mount locking screw....