All Things Astro
You have %itemCount% in your cart. Total being %total%
Adapter ESATTO 4" for Takahashi FSQ-106 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter is designed to have, when used together with ESATTO 4", the same thickness of the...
The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH300 allows you to install ESATTO 3.5" LP focuser to Veloce RH300 telescopes by Officina Stellare. Optical thickness 9mm.
The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3.5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm. Since RH200 optimal backfocus...
If you are searching for the most precise but low profile robotic focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you...
Adapter ESATTO 3.5" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 3.5" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...
By adding this adapter, you can connect the ESATTO 3.5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a...
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm...
Adapter ESATTO 3" for Meade 16" with 4" thread allows you to connect ESATTO 3" to Meade LX200 SCT, LX200 GPS, LX200-ACF, LX600-ACF, LX800-ACF, LX850-ACF 16 inches telescopes or to all the telescopes that have...
Adapter ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED. Specifications
Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED.
Adapter ESATTO 3" for Borg 90FL and 107FL f/3.9 is composed by 2 rings, one to connect the microfocuser to the carbon fiber optical tube and another one to insert the Borg reducer/flattener in the...
Adapter ESATTO 3" for Takahashi TSA120
Thanks to its low profile, the ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back...
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you...
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO...
ARCO 2" connected to ESATTO 2" LP thanks to the optional Adapter ESATTO 2" LP for ARCO 2" PL3600538: free aperture after ARCO 2" is 50.9mm.
Adapter ESATTO 2" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...
By adding this adapter, you can connect the ESATTO 2" LP low profile robotic focuser directly onto the back of SC telescopes. This adapter threads directly to the back SC thread of EdgeHD 8" and...
The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm...
If you are searching for the most precise motorized focuser for Takahashi FS-60Q, this adapter allows you to connect ESATTO 2" to this telescope. Based on the camera and accessories train you want to connect,...
The Borg reducer (7880) has to be connected after the rotator. In the picture below you can see how to connect the Borg 55FL lens. PLUS 80mm support rings are not included with this kit....
Specifications Dimensions of the adapter ESATTO 2" for SkyWatcher/Orion ED80, ED100 and ED120. Optical thickness is 40mm.
ESATTO 2" focuser installed on SkyWatcher Newton 250mm telescope instead of the original focuser. Specifications Dimensions of the adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f/4 and f/5. Optical thickness is 3.5mm.
ESATTO 2" focuser installed on SkyWatcher Newton 200mm telescope instead of the original focuser. Specifications Dimensions of the adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f/4 and f/5. Optical thickness is 3.5mm.
ESATTO is the perfect microfocuser for SC and Aplanatic Schmidt-Cassegrain telescopes (like the Celestron EdgeHD). By adding this adapter, you can connect it to the large 3.3" thread in the back of the Celestron SCT...
Thanks to the adapter ESATTO 2" for telescopes with SC thread you can connect the ESATTO 2" to SC telescopes like the Celestron, C6, C8, C9.25 and EdgeHD800. In the picture below, Celestron C9.25 telescope...
Usage Specifications User Guide
This GPS antenna is included with every EAGLE4, EAGLE4 S and EAGLE4 PRO. This GPS antenna is not compatible with other and/or previous versions of the EAGLE control units.
These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2...
PLUS raisers for EAGLE CORE allow you to install, on the side of its body, the 80mm PLUS guide rings without them to touch the EAGLE CORE body. This way you can install the guide...
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the...
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope...
Since this PLLCG60 guide scope already comes with PLUS guide rings, you can connect the "Guide rings support plate for ECCO" on top of the ECCO and then connect the 80mm PLUS guide rings that...
These adapters allow you to connect either: EQ6 / EQ6-R / AZ-EQ6 / CGEM mounts EQ8 mounts GM1000 GM2000 GM3000 Paramount MX to the C120 pier. Note: Pier not included. Available for purchase separately.
These adapters allow you to connect either: EQ5 / HEQ5 / AZ-EQ5 mounts, or EQ6 / AZ-EQ6 / CGEM mounts to the C82 pier. Note: Pier not included. Available for purchase separately.
C120 pier is the perfect solution to install even a large telescope in an astronomical observatory. The C120 pier has a high load capacity (150 kg) and, compared to a standard tripod, it provides high...
When you want to install a telescope under a dome, the pier is preferable since not only it provides very good stability but it also needs for less space and it prevents the telescope installed...
With this adapter, you can install your mount onto iOptron Tri-Pier 360 (#8037) and Permanent Pier (#8038). Currently, the following mount is supported: Replacement Pier Top for Celestron CGX/CGX-L
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier. The Pier Top can be used to mount the: CEM40 or GEM45 (w/ center post) Note: Due to the...
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier. The Pier Top can be used to mount the following mounts (with the appropriate mounting accessories): CEM60/CEM70 (w/...
With this adapter, you can install your mount onto the sturdy yet portable iOptron Tri-pier. This adapter is the Tri-pier Adapter for: Takahashi (EM-200), SkyWatcher (HEQ5/EQ6/NEQ6/AZEQ6) Celestron (CGEM/CGEM-DX) Orion Atlas (EQ-G/AZEQ-G)
With this adapter, you can install your mount onto the sturdy yet portable iOptron Tri-pier. This adapter is the Tri-pier Adapter for Paramount MyT
With this adapter, you can install your mount onto the sturdy yet portable iOptron Tri-pier. This adapter is the Tri-pier Adapter for CEM120 (#8036-120) Note: Due to the payload limitation of the Tri-Pier, this adapter/Tri-pier...
With this adapter, you can install your mount onto the sturdy yet portable iOptron Tri-pier. This adapter is the Tri-pier Adapter for Astro-Physics 400/600E/Mach1GOTO
With this adapter, you can install your mount onto the sturdy yet portable iOptron Tri-pier. This adapter is the Tri-pier Adapter for ZEQ25/CEM25
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier. The Pier Top can be used to mount the: AZ Mount Pro/MiniTower/MiniTower II/MiniTower (w/ a center T-bolt) Specifications...
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier. The Pier Top can be used to mount the: CEM60 or CEM70 (w/ center post) Specifications Plate diameter:...
iEQ45-AZ Secondary Dovetail Saddle and Shaft