Telescope Mounts and Tripods

79021 - Power Cable for AZ-EQ6 Mount - SkyWatcher

Skywatcher Holder for the Hand Controller for the Stainlesss Steel Tripod or Aluminum Tripod The holder fits, among others, to the stainless steel or aluminium tripod of the EQ3, EQ5, H-EQ5, EQ6, AZ-EQ6, ... SynScan...

Fits D Series dovetail bars. D Series dovetail clamp allows you to attach the QHY PoleMaster to a D series dovetail bar. Incorporates a split clamp design that grips the dovetail bar along the entire...

Converts V Series mounts to a D Series saddle. Converts the Popular Vixen style dovetail saddle to the Losmandy Style saddle. Simply attach the saddle adapter to your mount just using the mount locking screw....

Fits D Series dovetail bars. Single axis, 360 deg. camera rotation. Dovetail mounted, no tools needed. Specifications DPA Length: 2.5" Width: 4.0" Thickness: 0.75" Weight: 14 oz. Camera bracket Height: 1.0" Weight: 2 oz.

DCW-D Series Counterweight with 5" Threaded Rod Fits D Series dovetail bars. Adds additional weight for balancing OTA’s. Split clamp design grips the dovetail bar along the entire surface of the saddle and will not...

V-Series dovetail adapter for polemaster mounting.

Fits V Series dovetail bars. V Series dovetail clamp allows you to attach accessories to a V series dovetail bar. Incorporates a split clamp design that grips the dovetail bar along the entire surface of...

Fits V Series dovetail bars. Single axis, 360 deg. camera rotation. Dovetail mounted, no tools needed. Specifications DPA Length: 1.75" Width: 2.5" Thickness: 1.75" Weight: 14 oz. Camera bracket Height: 1.0" Weight: 2 oz.

Tube ring set for 90mm (3.5") tubes. Aluminum with felt liner, these mount with included 6mm hardware and can be used with most bars. One ring features 1/4"-20 thread for camera mounting. Black colour.

Fit Orion CF-80 ED ; Lunt Engineering 80 , Orion 80mm guidescope. Our cast-aluminum telescope tube rings feature quick-release, hinged clamp knobs and a felt lining for safe and secure attachment your telescope to an...

The Askar Losmandy-style universal dovetail plate is made of lightweight aluminum alloy and is more resistant to scratches or collisions due to its anodized finish. The dovetail plate is compatible with a wide array of...

The Askar Losmandy-style universal dovetail plate is made of lightweight aluminum alloy and is more resistant to scratches or collisions due to its anodized finish. The dovetail plate is compatible with a wide array of...

The Askar Losmandy-style universal dovetail plate is made of lightweight aluminum alloy and is more resistant to scratches or collisions due to its anodized finish. The dovetail plate is compatible with a wide array of...

Most dovetail plates can only satisfy a small number of predetermined attachments because there are a few build-in holes tapped into them. The Askar new narrow dovetail plate will allow much more potential attachments with...

Most dovetail plates can only satisfy a small number of predetermined attachments because there are a few build-in holes tapped into them. The Askar new narrow dovetail plate will allow much more potential attachments with...

Most dovetail plates can only satisfy a small number of predetermined attachments because there are a few build-in holes tapped into them. The Askar new narrow dovetail plate will allow much more potential attachments with...

The Celestron 11" CGE Dovetail Bar is 17.5" in length and is built specifically for the Celestron C11 OTA but is compatible with the Celestron CGEM Mounts and the Celestron CGE Pro Mounts.This Dovetail bar...

Whether you are enhancing your mount setup or buying a replacement part, the counterweight is there to balance weight of the optical tube (OTA) and accessories on the other side of the Right Accession (RA...

The Celestron 14" Dovetail Bar is 14" in length and pairs perfectly with the Celestron C14 Optical Tube but also works with the Celestron CGEM and Celestron CGE Pro Mounts. This 14" Dovetail Bar by...

The Celestron 8" Dovetail Bar is built specifically for the Celestron C8 Optical Tube, but also works with the Celestron CGEM and Celestron CGE Pro Mounts. This 8" Dovetail Bar by Celestron is made to...

The Celestron 9.25" Dovetail Bar is built specifically for the Celestron 9.25" Optical Tubes but also works with the Celestron CGEM and Celestron CGE Pro Mounts. This 9.25" Dovetail Bar by Celestron is made to...

The Advanced VX or AVX Mount (91519) sets a standard in mid-level telescopes, providing many of the features found on Celestron’s most sophisticated German equatorial mounts at an extremely affordable price. The Advanced VX mount is...

Alignment Pin for top of tripod - works with Celestron and Sky-Watcher mounts.

This adapter allows you to mount your binocular (porro or roof) to a tripod for added stability and convenience. This handy adapter attaches to the center-hinge of most porro and roof prism binoculars, aowing you...

A fresh update to the venerable CGEM mount, the CGEM II has a contemporary, attractive, bold appearance and is capable of carrying Celestron’s higher-end SCT optical tubes (up to 11") securely and vibration free, which...

For eight years, Celestron’s workhorse CGEM mount lineup has been the German Equatorial backbone for telescopes ranging from 6 to 11 inches of aperture. Since that time, many more astro-imagers and planetarium controlled setups have...

Celestron's CGX-L Computerized Equatorial mount is the latest addition to our fully computerized equatorial mount series. Capable of carrying Celestron’s largest optical tubes with ease, CGX-L is designed for backyard observatories and remote imagers looking...

Celestron's CGX-L Computerized Equatorial mount is the latest addition to our fully computerized equatorial mount series. Capable of carrying Celestron’s largest optical tubes with ease, CGX-L is designed for backyard observatories and remote imagers looking...

Whether you are enhancing your mount setup or buying a replacement part, the counterweight is there to balance weight of the optical tube (OTA) and accessories on the other side of the Right Accession (RA...

Whether you are enhancing your mount setup or buying a replacement part, the counterweight is there to balance weight of the optical tube (OTA) and accessories on the other side of the Right Accession (RA...

This counterweight shaft has a 12mm threaded end (Fits the Sky-Watcher AZ-GTi mount) and accepts various counterweights with 12mm hole.

Celestron's HD Pro Wedge is designed to support our fork mounted Schmidt Cassegrain Telescopes up to 11". The HD Pro Wedge provides a heavy duty, stable platform that is perfect for astroimaging and guarantees minimal...

The Hummingbird tripod is an excellent choice for those seeking a lightweight yet stable platform for a spotting scope, binocular or camera. With four leg sections, three leg angles and an adjustable center column, the...

The Celestron NexStar+ AZ Hand Control is the standard computer accessory on all current altazimuth mounted Celestron go-to telescopes: SLT, LCM, SE, NexStar Evolution, and CPC, and CPC Deluxe computerized telescopes. With the push of...

The Celestron NexStar+ EQ Hand Control is the standard computer accessory on all current equatorially mounted Celestron go-to telescopes: Advanced VX, CGEM, CGEM II, CGX, & CGX-L computerized telescopes. With the push of a button,...

The Celestron CG-4 equatorial mount is great for the amateur astronomer who wants to move up to a more stable mount. It is also popular with those who would like a lightweight EQ mount for...

The perfect tripod should be stable yet lightweight and easy to operate, requiring minimal knob twisting and lever flipping. The Celestron Regal was designed to be your perfect tripod. It is lightweight (6.04 lb.) and...

This dovetail bar connects to the top of the Rowe-Ackermann Schmidt Astrograph 8, and allows attachment of accessories that can mount onto CGE or Losmandy D-series dovetail plates.

Ditch the hand controller and add the power of wifi remote control to your telescope. Simply plug this into your AUX port and connect to the wifi network it creates.

Eliminate the need for your full-height tripod and enjoy grab-and-go convenience when you add the Tabletop Tripod to your NexStar Evolution or NexStar SE telescope. This compact and sturdy accessory is half the size and...

The perfect tripod should be stable yet lightweight and easy to operate, requiring minimal knob twisting and lever flipping. The Celestron TrailSeeker was designed to be your perfect tripod. It is lightweight (3.94 lb.) and...

Enjoy a more comfortable viewing experience with your StarSense Explorer Tabletop Dobsonian telescope with this adjustable-height tripod. Adding this solid, sturdy tripod allows you to set up your Tabletop Dobsonian at the perfect height for...

The Celestron CG-5 Universal Mounting Plate is a basic accessory that allows you to attach a wide range of telescope accessories to the mounting platform of an Advanced CG-5 or Advanced VX mount. It will...

The Celestron CGE Universal Mounting Plate is a basic accessory that allows you to attach a wide range of telescope accessories to the mounting platform of a CGE, CGE Pro, CGEM or CGEM-DX mount. It...

Wind, an unsteady tripod, or even an accidental bump can disturb your image quality. Keep your telescope still while observing with these sturdy pads. Simply place your tripod legs on top of the pads to...

The Wedge for NexStar Evolution and SE 6/8 mounts turns our venerable single fork arm telescopes into portable astroimaging powerhouses. Our popular NexStar SE and NexStar Evolution telescopes are great for astrophotography, however an EQ...

6" long aluminum dovetail with slotted holes. Attach this to your scope, then use it to mount the scope assembly onto a suitable Vixen style Saddle Plate on a mount.

The Twilight I is a light-to-medium-duty alt-azimuth mount and tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 or ED102mm, and of course, the ED80mm. Lightweight, fast Newtonians...

This new 1.35 kg (3 lb) counterweight is designed for SkyTracker Pro and SkyGuider pro counterweight package (#3324), as well as other iOptron mounts. Compatible iOptron Mounts SkyGuider Pro SkyGuider CubePro Cube-A (Dual AltAz/EQ mounts)*...