All Things Astro
You have %itemCount% in your cart. Total being %total%
8-inch tall CEM26/GEM28 mini pier. Die-cast and machined metal. Perfect for adding distance between scope and tripod on iOptron CEM26/GEM28 mounts. Specifications Height: 8" Diameter: 4" (100 mm) Weight: 2lbs
Introducing iOptron’s new compact next-generation center-balance equatorial mounts the CEM26EC! Like their predecessors, the CEM26 is designed with portability in mind, weighing in at only 10 lbs it can support up to a 26lb payload...
The iOptron® CEM40 mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing...
CEM40 counterweight shaft mounting house for low latitude (~10 degree and lower). Note: To replace the standard CEM40 counterweight shaft mounting house.
The iOptron® CEM40G mount is the next generation of center-balanced equatorial mounts with a built-in iGuider guiding camera. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality...
Introducing iOptron CEM40-NUC equatorial mount! Need more versatility of an equatorial mount without cable tangling? Tired of connection error with some third party control interface? Check out the iOptron NUC-ready mounts! A CEM40-NUC is ready...
The iOptron CEM40/GEM45 LiteRoc tripod has a die-cast aluminum top with heavy duty stainless steel tripod legs The new LiteRoc tripod features a 1.75” upper leg section with a 1.5” diameter lower section (same as...
The iOptron® CEM40EC mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing...
Introducing iOptron CEM40EC-NUC equatorial mount! Need more versatility of an equatorial mount without cable tangling? Tired of connection error with some third party control interface? Check out the iOptron NUC-ready mounts! A CEM40EC-NUC is ready...
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce two new medium payload center balance mounts. The CEM70 and revolutionary CEM70G are new standard...
This Hard Case for CEM70 mount protects your mount whether you're heading out for a night of observation, or when you need to store it. The case features custom-fit foam padding to hold the mount...
The iOptron iEQ45/CEM60/CEM70 LiteRoc tripod has a die-cast aluminum top with heavy duty stainless steel tripod legs. The new LiteRoc tripod features a 1.75" upper leg section with a 1.5" diameter lower section (same as...
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce two new medium payload center balance mounts. The CEM70 and CEM70G are new standard bearers...
Introducing iOptron CEM70-NUC equatorial mount! Need more versatility of an equatorial mount without cable tangling? Tired of connection error with some third party control interface? Check out the iOptron NUC-ready mounts ! A CEM70-NUC is...
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce two new medium payload center balance mounts. The CEM70AW the new standard bearer for equatorial...
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce two new medium payload center balance mounts. The CEM70 series mounts are new standard bearers...
Introducing iOptron CEM70EC-NUC equatorial mount! Need more versatility of an equatorial mount without cable tangling? Tired of connection error with some third party control interface? Check out the iOptron NUC-ready mounts! A CEM70EC-NUC is ready...
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce a new medium payload center balance mount. The CEM70EC2 dual high resolution encoder mount the...
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce a new medium payload center balance mount. The CEM70EC2W dual high resolution encoder mount the...
One of this center post is needed to attach a CEM60 or iEQ45/iEQ45 Pro mount onto a Tri-Pier 360 (#8037) or Permanent Pier (8038), depends on the pier center disk configuration. Note: The black plat is...
This 6P4C cable connects your Go2Nova Controller to your mount. It works with all iOptron hand controllers. Recommended for Cube, Cube Pro, SmartEQ and CEM25/ZEQ25 mounts.
This 6P6C cable connects your Go2Nova Controller to your mount. It also connects between R.A. and DEC ports. It works with all iOptron mounts. Specification Overview Coiled cable 6P6C RJ11 plug Straight wired
This counterweight bar fits a HEM27/HEM44 mount. It is also the original CW bar for a CEM26/GEM28 mount. Safety Locking Screw Included Specifications Diameter: 20mm (0.79 in) Length: 200mm (7.87 in) Thread: M16-2mm (both ends)...
This secondary dovetail saddle kit fits on all iOptron Cube mounts, including CubePro, Cube-E, Cube-G and Cube-A mounts. It accepts a Vixen style dovetail bar. The mounting block has a 1/4" mounting screw. A camera...
Additional 10 kg counterweight for the CEM120 mount.
10 kg counterweight for a CEM120 mount set at low latitude (<10°)
1 kg counterweight for iOptron SmartEQTM and SmartEQ ProTM mounts. It will also fit onto a counterweight shaft with a diameter of 16mm. Specifications Weight: ~1 kg (2 lbs.) Outer diameter: 78.6 mm (3 in.)...
This 2.5 kg (5.5lb) counterweight is designed for following iOptron mounts: CEM70/CEM70EC/CEM70G CEM60/CEM60EC GEM45/GEM45EC/GEM40G CEM40/CEM40EC/CEM40G* (for late version with 28mm CW shaft) iEQ45 Pro iEQ45 It can be used for other mount with a 28mm...
This is an original replacement counterweight shaft (w/o CW safety screw) and the extension bar for the iEQ45 Pro/iEQ45/GEM45. This is also the extension bar for the CEM40/60/70 GEM45 mounts. Attach to the CW shaft...
Stainless steel counterweight shaft for iOptron SmartStar CubeTM and CubeProTM mount. Specifications Diameter: 19mm (0.74 in) Length: 150mm (5.9 in) Thread: M14 (female) Weight: 11 oz
DC power 5.5mm/2.1mm female to 5.5mm/2.5mm male adapter. Can be used for CEM60 Cable management Input Panel or CEM120 main power.
Losmandy Saddle for MiniTower II and MiniTower Pro Specifications Inside minimum width: 2 7/8 inch Inside minimum length: 6 inch
A Vixen style universal dovetail plate which fits all iOptron mounts, as well as, other popular mounts.
A Vixen style dovetail plate adapter designed for the iOptron iEQ45 dual saddle. It can fit all iOptron mounts, as well as, other popular mounts.
This 6" long dual dovetail saddle can convert a Vixen saddle into a Vixen/Losmandy dual saddle.
This iOptron Electric Focuser (eFocuser) is designed for iOptron MAK 150 dual speed focuser. Now you can focus the telescope by pushing a hand controller button. it is compatible to most iOptron later version mounts....
This iOptron Electric Focuser (eFocuser) is designed for iOptron PhotronTM Ritchey-Chrétien (RC) telescope dual-speed focuser. Now you can focus the telescope by pushing a hand controller button. it is compatible to most iOptron later version...
1.25 inch 10mm Plossl eyepiece Specifications Apparent FOV: 50 degrees Eye relief: 7 mm
1.25 inch 25mm Plossl eyepiece Specifications Apparent FOV: 50 degrees Eye relief: 17.5 mm
1.25 inch Plossl eyepiece set Specifications 10mm Apparent FOV: 50 degrees Eye relief: 7 mm 25mm Apparent FOV: 50 degrees Eye relief: 17.5 mm
Introducing iOptron’s new compact next-generation German equatorial mounts the GEM28! Like their predecessors, the GEM28 is designed with portability in mind, weighing in at only 10 lbs it can support up to a 28lb payload...
iOptron AccuAlignTM dark field illuminated polar scope for a GEM28 mount.